Notebook

Notebook, 1993-

MATERIALS & METHODS - Painting - Oil Painting

Characteristics - Painting Methods & Techniques - Materials and Equipment - Work Space & Storage - Manufacture of Pigments - Protection of the Picture

Oil Painting - Rule


Rule for Sequence of Oil-Films [Fat Over Lean]
When layers of oil paint are placed one over the other, problems arise which affect the durability of the picture. First, the upper layer must stick well to the one below it; otherwise it will peel off. Paints that are rich in binding oil dry to a very glossy smooth finish. The more oil, the glossier or "fatter" the surface will be. Paint containing less oil will not stick well to such a nonabsorbent surface. For this reason the traditional rule of painting (both artistic painting and house painting) has always been that the first layers of point put on a surface contain less oil than do the subsequent layers. Thus a picture should be planned so that the underpainting is quite "lean" (that is, rich in pigment and low in oil content) and the layers above it become progressively "fatter (oilier).

There is another important reason for this rule. As previously explained, linseed oil oxidizes as it dries. It unites with oxygen from the atmosphere, becoming heavier in the process. Furthermore, it moves as it dries, expanding and contracting its bulk considerably. Since the film dries from the top (where the air is) toward the bottom, it may be dry or tacky on the surface while it is still oxidizing and swelling below the surface. If a film of "leaner" paint containing less oil is placed over such a half-dry underpainting, the lean film may become thoroughly solid and dry before the fat film has completely gone through its drying process. In such a case the movements of the lower film may cause the dry upper film to crack and fracture, in much the same way that heaving ground may cause a concrete sidewalk to crack.

Because of these facts, a painter who develops pictures in several layers of paint should use a painting medium in the upper layers that contains a higher percentage of oily ingredient than does the medium in the lower layers of the underpainting. (Varnish is not considered an oily ingredient since it does not expand on drying.) Therefore the medium for underpainting should contain somewhat more varnish and turpentine, while the medium for overpainting should contain more oil. If possible, the underpainting should be applied as a denser, drier paste (thinned with less medium), whereas the overpainting should be richer, oilier, and slightly more fluid. Fast-drying colors, such as lead white or Naples yellow, are to be preferred in the underpainting, and the slower-drying pigments, such as zinc white or cadmium yellow, should be reserved for overpainting whenever possible. [p. 83]

[Kay, Reed. The Painter's Guide to Studio Methods and Materials. Englewood Cliffs, NJ: Prentice-Hall, Inc., 1983. pp. 127-129]




NOTEBOOK | Links

Copyright

The contents of this site, including all images and text, are for personal, educational, non-commercial use only. The contents of this site may not be reproduced in any form without proper reference to Text, Author, Publisher, and Date of Publication [and page #s when suitable].